Vi leier ut 2 kraftige høyttalere.
Disse klarer levere mektig og ren lyd med flott akustikk og kan brukes til bl.annet festivaler, musikk-arrangement og show.
Spesifikasjoner på engelsk:
SRM450 Specifications
| System | |
| Input Type | Balanced Differential |
| Input Impedance | Line: 20k ohms |
| Input Protection | RFI and level protected |
| Sensitivity | Line: +4 dBu (center detent) Mic: -36 dBu |
| Maximum Input Level | Line: +22 dBu |
| Low-Cut Frequency | 75Hz, Second-order filter |
| Acoustic Contour Equalization | Peaking: +3 dB @ 100Hz +3 dB @ 12kHz |
| Enclosure Alignment | Sixth-Order |
| Over-Excursion Protection | Second-Order High-Pass Filter |
| Thermal Protection | Amplifier shutdown, auto reset |
| Low-Line Voltage Shut Down | 60% Nominal line |
| Frequency Range (-10 dB) | 45Hz – 20KHz |
| Frequency Response (±3 dB) | 55Hz – 18kHz |
| Maximum Peak SPL @ 1m | 127 dB |
| Low-Freq Crossover | 24 dB/octave, time offset corrected |
| High-Freq Crossover | 24 dB/octave |
| Crossover Frequency | 1.6kHz |
| Driver Protection | Independent LF and HF compressors |
| Low-Freq Roll-Off | Dynamic-signal level dependent |
| Accessory Interface | ±15V DC, normalized signal I/O |
| Operating Temperature Range | -10°C to 45° C (14°F to 113°F) |
| Transducer | |
| Low-Frequency Transducer: | |
| Diameter | 300mm (12″) |
| Power Handling | 450 watts RMS |
| Frequency Range | 45Hz – 3kHz |
| Hi-Frequency Driver and Horn: | |
| Diaphragm Diameter | 44mm (1.75″) |
| Exit Throat Diameter | 25mm (1″) |
| Diaphragm Material | Titanium |
| Sensitivity (1W@1m) | 106 dB |
| Power Handling | 100 watts RMS |
| Frequency Range | 1kHz – 20kHz |
| Horn Type | Composite: Exponential and Conical |
| Mouth Size | 305mm (12″) W x 178mm (7″) H |
| Horn Coverage : | |
| Horizontal Coverage | 90° |
| Vertical Coverage | 45° |
| Power Amplifier and System | |
| Low-Frequency Power Amplifier: | |
| Rated Power | 300 watts RMS |
| Rated THD | < 0.1% |
| Cooling | Convection Extrusion |
| Design | Class G, Parametric Servo Feedback |
| High-frequency amplifier: | |
| Rated Power | 100 watts @ High-Frequency Driver Impedance |
| Rated THD | < 0.1% |
| Cooling | Convection Extrusion |
| Design | Conventional Class AB |
| Line Input Power | |
| US | 120V, 60Hz |
| Europe | 230V, 50Hz |
| Japan | 100V, 50/60Hz |
| Physical Properties | |
| Height | 660mm (26″) |
| Width | 390mm (15.4″) |
| Depth | 376mm (14.8″) |
| Weight | 23.2kg (51 lbs.) |
| Enclosure Geometry | Asymmetrical Trapezoidal |
| Mounting Methods | Integrated mounting points, M10 |